Steel Inground Swimming Pool Kit Wall Braces

Standard Adjustable A-Frame Brace

Standard Adjustable A-frame Brace’s come standard with any in-ground steel pool kit. These steel braces allow for adjusting of your pool wall after the concrete footing is poured – this helps straighten the wall if needed. Each brace is extremely easy to use and is coated with G-235, the Highest Zinc Coating Available!

Adjustable A-Frame Brace With Corner A-Frames

The Standard Adjustable A-frame Brace with Corner A-Frames adds a bit more stability when pouring your concrete collar. The corner A-frames act as a “dead man” and will more securely tie your brace into the footer after it’s poured. This steel brace also still allows for adjusting of your pool wall after the concrete footing is poured to help straighten the wall if needed. Each brace is extremely easy to use and is coated with G-235, the Highest Zinc Coating Available!

Adjustable A-Frame Brace With Deck Support

This brace is recommended when selecting the cantilever coping option for your deck. The extra support is recommended when laying stone or brick around the deck and will provide the extra support needed for years of use.  Each brace is easy to use and is coated with G-235, the Highest Zinc Coating Available!

The fold over one-piece deck brace system is very easy to install and provides additional support for your deck. This FOB deck support can be used on any pool type but is recommended for use with cantilever coping. While not required, deck supports help provide extra stability for pavers, brick our poured concrete decks.

Most builders use 1 deck support at 6’ intervals. More can be added if desired, typically deck supports would be placed at a maximum of every 4’ or every 6’. The distance between deck supports can vary based on the builder’s preference.

Warning!  Using steel braces on a polymer wall pool kit may VOID your warranty and does not pass a professional engineers structural calculations.  Please ask for a copy of the engineered drawings that accompany your swimming pool kits wall panel system.  After carefully examining your pool walls “Stamped Engineered Drawings” you will find that NO inground swimming pool kit manufacturer, or licensed engineer, authorizes the use of a steel brace with a polymer pool wall panel system.

Polymer Inground Swimming Pool Kit Wall Braces

The Hydra Cornerstone pool kit wall brace is the strongest and most functional brace in the swimming pool industry!  This unique polymer brace is fastened by four nylon molded bolts, at four stud-and-socket locations, ensuring that your swimming pool walls will never bow in over time.  The Cornerstone brace also features a wide rear stabilizing pad that actually uses backfill pressure to keep your pool kit walls plumb and straight.  We also include a heavy-duty polymer stake that should provide extra support in most conditions.

Have Questions?

If you have questions about our inground swimming pool kit braces, vinyl swimming pool liners or pool kits please feel free to give us a call at 1-800-515-1747 or send us an email, [email protected].

At Pool Warehouse, We Know Swimming Inground Pool Kits!