Laguna Plug-N-Play Spas
Laguna Plug-N-Play Spas are revolutionizing the spa industry with its durable, one-piece spas! Constructed of advanced polyethylene material, this spa will endure in any climate on Earth – from the heat of Arizona to the salty air of California, to the snows of Alaska. Laguna Spas provides a simply durable spa that will last a lifetime – they guarantee it!
Quality Benefits
- Excellent Noise Absorption
- Sustainable Product
- Strong Thermal Protection
- No Itch Or Skin Irritation
- Resists Microbial Growth
Features
One-piece Roto-mold Body
Solid, durable one-piece construction
No rotting wood
Keeps heat in
Virtually Maintenance Free! |
 Solid Bottom
Keeps bugs and rodents out |
 Can be Placed on Any Flat Surface
Can be placed on ANY flat, level surface such as concrete, tile, gravel, sand, or grass. There is no need to spend extra money having a pad poured for your Laguna Spa. |
 Large Easy-access Side Panels
Side access panels on all four sides to allow access to every part of your spa. This makes any maintenance on the spa simple and easy. |
5 Layers of Insulation!
- Blown Polystyrene
- Reflective Foil Covering
- Blue sTUFF R22 Insulation
- White Foam
- Polyethylene Shell
Plug-N-Play Ready
All Laguna Spas come Plug-in ready – expensive electrical work isn’t needed with this spa. Just plug it in to any standard electrical outlet and it works! All spas come with a built-in 240V converter if you choose to hard-wire into the main electrical panel.
Installation
|
 Laguna Hot Tubs must be placed on a Patio, concrete slab, gravel base, hard-packed ground or deck that is flat and level, and the same size as the Spa or larger. Spas cannot be placed on uneven ground or on extremely soft ground as it will sink and both may damage the Spa. The key to all base applications is FLAT & LEVEL. As long as you are 2”- 3” within level, on any surface, you will be fine. If you are NOT using an existing Patio or previously constructed Deck or Base, please see the options below to find the one that will suit your situation best. (See the images below for reference)
 Pea Gravel
Pea gravel is simple to level by using a straight 2 x 4 and carpenter ‘s level to check. Crushed rock is another choice. A disadvantage of gravel is the messy appearance, and weed control issues. |
Decking
Pressure-treated decking can be used as a base. The decking should be fitted to a base frame made from 4” X 4” timber, which must be supported at regular intervals. The key here is filling in between the timbers (with sand or like material) so you have a FLAT surface for the spa to sit on. |
Patio Stones/Pavers
Another foundation choice is pre-cast concrete patio slabs/pavers. Depending on the size of your spa and the stones, two rows of four (8) or three rows of three (9) are usually enough, if evenly spaced (depending on the size of the spa). Make sure they are well seated and level. Again, filling in between the pavers (with sand or like material) so you have a FLAT surface. |
Concrete Slab
Although expensive, a poured concrete slab about 4″ in thickness is a common choice for a permanent installation and can be made a little wider than the spa to provide for a clean walkway and storage area. |
Directly on Hard Packed Ground
Zen Hot Tubs are one of the few spas on the market where this is an option. Placing the spa directly onto a level dirt surface is sometimes acceptable. We do however suggest that you use, 4×8 sheets of 1” to 2” foam between the dirt and spa to offer a “cushion” for the spa to sit on. Taping two sheets of the foam together will be plenty of surface area for any size Zen Hot Tub, and then simply cut away any excess after getting the spa in place.
(Please take into account your Electrical source when considering your base type & location |
Delivery
The Spa will generally be delivered on a trailer. Please ensure there is adequate access to your driveway and Spa site. Hot Tubs will be positioned using a rolling dolly. The Spa will be positioned sideways onto the dolly. If you have ordered a Spa, but feel the dolly will not be adequate for maneuvering your Spa, then please let us know so that we can discuss your individual requirements. To avoid disappointment please check the points to consider below.
Access
Check the dimensions of your Spa and compare the Spa dimensions to the width of any gates and paths along the delivery route between the road and the installation site (typically 36” gate openings are needed). It may be necessary for you to remove a gate or partially remove a fence in order to provide an unobstructed passageway. If the delivery route will require a 90-degree turn, don’t forget to check the measurements at the turn to ensure the Hot Tub will fit. Also, look for any protruding utility meters, low roof eaves, overhanging trees or gutters that might cause an obstruction. In some very rare circumstances, it might be necessary to hire a crane for the installation. This would be to avoid damage to the Tub or to your property because there is no other way to get the spa into position. This extra cost for the crane would have to be met by you. |
|
 GoGreen
Built for the planet, built for a lifetime!
 Insulation made from sustainable denim material.
All waste and trim pieces are recycled and reused.
Lifetime warranty on shell that will not end up in a landfill.
No volatile organic compounds like other spas.
No Resin blown in manufacturing like other spas.
One piece, heat-retaining shell that traps heat in and reduces electrical usage.
Two speed pumps that filter and heat on low speed drawing minimal amps.
110V and 220V options that offer far less amp draw and electrical usage than most spas.
Made using natural gas, which is the cleanest burning fuel.
Material is recyclable.
No Fiberglass blown like other spas.
No Urethane blown like other spas.
Fewer emissions in manufacturing than other spas |
|
Pool Warehouse
Americas #1 Source For All Your Backyard Needs, Online Since 1998!
Open: Monday-Friday 9am-6pm
Phone: 800-515-1747
Email: [email protected]
Pool Warehouse, Making Backyard Dreams Come True!
Solid Bottom
Can be Placed on Any Flat Surface
Large Easy-access Side Panels
Laguna Hot Tubs must be placed on a Patio, concrete slab, gravel base, hard-packed ground or deck that is flat and level, and the same size as the Spa or larger. Spas cannot be placed on uneven ground or on extremely soft ground as it will sink and both may damage the Spa. The key to all base applications is FLAT & LEVEL. As long as you are 2”- 3” within level, on any surface, you will be fine. If you are NOT using an existing Patio or previously constructed Deck or Base, please see the options below to find the one that will suit your situation best. (See the images below for reference)
Pea Gravel
Decking
Patio Stones/Pavers
Concrete Slab
Directly on Hard Packed Ground
GoGreen
Insulation made from sustainable denim material.
What are our customers saying?
