Hayward AquaRite Pro 40k Gallon Salt Generator With Sense & Dispense

Expert Line Only

  • For full automation, the kit requires the purchase of acid feeder tank or CO2 dispense kit to control the pool’s pH.
  • AquaRite Pro Power Center Included
  • hayward pool productsSense and Dispense Included
  • AQR T-CELL-15 for 40,000 Gallon Pools Included
  • 2″ PVC Unions Included
  • 2″ PVC Tee with flow switch Included

Join the waitlist to be emailed when this product becomes available

SKU: GLD-45-140 Category: Tags: , ,

Description

Hayward AquaRite Pro AQR15 Salt Generator System

Professional-grade Hayward AquaRite Pro AQR15 Salt Generator System takes pool and spa sanitation and chemistry management to new levels, building upon the industry-leading salt chlorinator – Aqua Rite. This integrated solution automatically senses ORP and pH levels and dispenses a self-renewing supply of pure chlorine generated from salt, while controlling pH. Integrating chemistry automation with sanitization eliminates the need for an additional device on the pool pad and lowers installation costs. So now you get the most consistent water quality possible, water that’s brilliant, soft and silky smooth, for the best possible pool experience.
Hayward AquaRite Pro AQR15 Salt Generator System

Hayward AquaRite Pro AQR15 Salt Generator System uses advanced electrolytic technology to convert a small amount of ordinary salt (one teaspoon per gallon of pool water) into a virtually endless supply of fresh, pure chlorine. The process can produce up to 1.45 pounds of chlorine a day – enough to satisfy the sanitization requirements of pools up to 40,000 gallons. And since the salt doesn’t wear out or evaporate, you rarely have to add more.

Included Sense and Dispense®
This professional-grade ORP and pH sense and dispense technology was previously only available for commercial pools. Goldline Controls now offers an economical approach, with the same level of accuracy, for residential in-ground pools.

Turbo Cell®
Right-sized salt chlorination
Goldline Controls now offers a new line of Turbo Cells for their salt chlorination and controls solutions. The cells come in three sizes: 40,000, 25,000 and 15,000 gallons. The new sizes enable you to right-size your pool for the most efficient and cost-effective chlorination possible. These cells are based on the proven Turbo Cell technology that made Goldline Controls the leader in salt chlorination. They automatically generate a self-renewing supply of fresh, pure chlorine for water that’s clean, clear and luxuriously soft.

Applications:

  • Chemistry Automation Sense and Dispense ORP (Chlorine) and pH
  • For in-ground pools up to 40,000, 25,000 or 15,000 gallons
  • Use multiple units for larger pools

Hayward AquaRite Pro AQR15 Salt Generator System Features:

  • Simple homeowner operation
    • Adjust chlorine output from 1-100%
  • The best water quality attainable
    • Always crystal clear and ready for swimming
    • Soft silky feel-no more red eyes or dry skin
  • Microprocessor automates all functions
  • Digital salt display and 8 diagnostic indicators
  • Patented Turbo Cell for maximum efficiency and flow rates
  • Super chlorinate function
  • Automatically cleans the cell by periodically reversing the polarity
  • Quick, weatherproof connections inside control door
  • Single unit for 120VAC/240VAC 50/60 Hz power input
  • Locking weatherproof enclosure
  • UL and CUL Listed, NSF certified
  • 1 Year Manufactures Warranty
Maintaining the Aqua Rite System
To maintain maximum performance, it is recommended that you open and visually inspect the cell every 3 months or after cleaning your filter. The Hayward AquaRite Pro AQR15 Salt Generator System will remind you to do this by flashing the “Inspect Cell” LED after approximately 500 hours of operation. After you inspect the cell (and clean, if necessary) press the small “diagnostic” button next to the display for 3 seconds to stop the flashing “Inspect Cell” LED and start the timer for the next 500 hours.
The Hayward AquaRite Pro AQR15 Salt Generator System electrolytic cell has a self-cleaning feature incorporated into the electronic control’s logic. In most cases, this self-cleaning action will keep the cell working at optimum efficiency. In areas where water is hard (high mineral content) and in pools where the water chemistry has been allowed to get “out of balance”, the cell may require periodic cleaning. The “Inspect Cell” LED will indicate if cell efficiency is decreased and servicing is necessary. If the “Inspect Cell” LED remains on after a thorough cleaning, the cell may be worn and require replacement.
Servicing and Cleaning the Aqua Rite cell
Turn off power to the Hayward AquaRite Pro AQR15 Salt Generator System before removing the electrolytic cell. Once removed, look inside the cell and inspect for scale formation (light colored crusty or flaky deposits) on the plates and for any debris which has passed through the filter and caught on the plates. If no deposits are visible, reinstall. If deposits are seen, use a high-pressure garden hose and try to flush the scale off. If this is not successful, use a plastic or wood tool (do not use metal as this will scratch the coating off the plates) and scrape deposits off of plates. Note that a buildup on the cell indicates that there is an unusually high calcium level in the pool (old pool water is usually the cause). If this is not corrected, you may to have to periodically clean the cell. The simplest way to avoid this is to bring the pool chemistry to the recommended levels as specified.
Mild Acid Washing: Use only in severe cases where flushing and scraping will not remove the majority of deposits. To acid wash, turn off power to Aqua Rite. Remove cell from the piping. In a clean plastic container, mix a 4:1 solution of water to muriatic acid (one gallon of water to one quart of muriatic acid). ALWAYS ADD ACID TO WATER – NEVER ADD WATER TO ACID. Be sure to wear rubber gloves and appropriate eye protection. The level of the solution in the container should just reach the top of the cell so that the wire harness compartment is NOT submerged. It may be helpful to coil the wiring before immersing the cell. The cell should soak for a few minutes and then rinse with a high-pressure garden hose. If any deposits are still visible, repeat soaking and rinsing. Replace cell and inspect again periodically.
Winterizing
The Hayward AquaRite Pro AQR15 Salt Generator System electrolytic cell and flow detection switch will be damaged by freezing water just as your pool plumbing would. In areas of the country which experience severe or extended periods of freezing temperatures, be sure to drain all water from the pump, filter, and supply and return lines before any freezing conditions occur. The electronic control is capable of withstanding any winter weather and should not be removed.

Have Questions?

If you have questions about the Hayward AquaRite Pro AQR15 Salt Generator System please feel free to give us a call at 1-800-515-1747 or send us an email, [email protected].

At Pool Warehouse, We Know Swimming Inground Pool Kits!

Additional information

Weight 33.85 lbs
Dimensions 20.75 × 14 × 13.25 in

1 review for Hayward AquaRite Pro 40k Gallon Salt Generator With Sense & Dispense

  1. David Ervin (verified owner)

    Fast service and product arrived in good shape

Sign Up & SAVE!!!

Be the first to know about special offers and new products!

"*" indicates required fields

This field is for validation purposes and should be left unchanged.