LS100 Laguna Plug-N-Play 2 Person Spa


  • Seats 2 Adults
  • 77″L x 52″W x 27″H
  • 10 Jets
  • Digital Top Side Display
  • 110 Volts
  • 20 Amps
  • Friction Heating
  • Skimmer w/25 sq. ft. Filter
  • 1 HP Pump
  • LED Light Included
  • Spa Cover Included!

Made By Tuff Spas

Tuff Spas

This item ships in 2 to 3 business days.

SKU: N/A Categories: , Tag:

Customers also viewed


LS100 Laguna Plug-N-Play 2 Person Spa

The LS100 Laguna Plug-N-Play 2 Person Spa provides maximal comfort for two people. The compact nature of the hot tub allows for placement in any confined space and the customized lounge seating allows for ultimate comfort. The polymer surface requires minimal maintenance and will last a long time due to its high durability. The bottom of the tub is one solid piece, which allows it to be placed on any surface without hassle. Its compact size is perfect for those with limited space and our lounge seating provides comfort for all sizes. The polymer surface is extremely durable and virtually maintenance free. A Solid bottom allows it to be placed on any surface.

LS100 Laguna Plug-N-Play 2 Person Spa

LS100 Laguna Plug-N-Play 2 Person Spa Features:

  • Seats 2 Adults
  • 77″L x 52″W x 27″H
  • 150 Gallons
  • 280 lbs. Dry Weight
  • Product Weight When Filled: 1606 lb.
  • Unibody Construction
  • Solid Bottom
  • Polar Pack Insulation
  • Plug & Play Design
  • Made In The USA!

LS100 Laguna Plug-N-Play 2 Person Spa Standard Equipment:

  • 10 Jets
  • Digital Top Side Display
  • 110 Volts
  • 20 Amps
  • Friction Heating
  • Skimmer w/25 sq. ft. Filter
  • 1 HP Pump
  • Cover with Lock Straps
  • LED Light Included
  • Ozone Ready


  • Shrink Wrapped
  • Ships On Pallet 8’
  • Comes in Box 56” x 32” x 87”
  • Curbside Delivery

Laguna Spas are revolutionizing the spa industry with its durable, one-piece spas! Constructed of an advanced polyethylene material, this spa will endure in any climate on Earth – from the heat of Arizona to the salty air of California, to the snows of Alaska. Laguna Spas provides a simply durable spa that will last a lifetime – they guarantee it!

Pool Warehouse

Have questions about the LS100 Laguna Plug-N-Play 2 Person Spa, please give us a call! Pool Warehouse, Americas #1 source for inground pool kits, inground swimming pool liners, above ground pool liners, above ground pool kits and Hot Tub Spas since 1998.
Phone: 800-515-1747

At Pool Warehouse, We Know Inground Swimming Pool Kits!

Additional information

Weight 280 lbs
Dimensions 77 × 52 × 27 in


Grey, Tan


LS100 Laguna Plug-N-Play 2 Person Spa - Roto Mold Body

One-piece Roto-mold Body

Solid, durable one-piece construction
No rotting wood
Keeps heat in
Virtually Maintenance Free!

LS100 Laguna Plug-N-Play 2 Person Spa - Solid Bottom

Solid Bottom

Keeps bugs and rodents out


LS100 Laguna Plug-N-Play 2 Person Spa - Surfaces

Can be Placed on Any Flat Surface

Can be placed on ANY flat, level surface such as concrete, tile, gravel, sand, or grass. There is no need to spend extra money having a pad poured for your Laguna Spa.


LS100 Laguna Plug-N-Play 2 Person Spa - Side Panels

Large Easy-access Side Panels

Side access panels on all four sides to allow access to every part of your spa. This makes any maintenance on the spa simple and easy.


5 Layers of Insulation!

LS100 Laguna Plug-N-Play 2 Person Spa - Insulation

  • Blown Polystyrene
  • Reflective Foil Covering
  • Blue sTUFF R22 Insulation
  • White Foam
  • Polyethylene Shell

Quality Benefits

  • Excellent Noise Absorption
  • Sustainable Product
  • Strong Thermal Protection
  • No Itch Or Skin Irritation
  • Resists Microbial Growth



Plug & Play Ready

All Laguna Spas come Plug-in ready – expensive electrical work isn’t needed with this spa. Just plug it into any standard electrical outlet and it works! All spas come with a built-in 240V converter if you choose to hard-wire into the main electrical panel.


120V option = 1kW heater and no high-speed when the heater is on;

240V option = 4kW heater and heater can run in high-speed.






    • Material is recyclable.
    • All waste and trim pieces are recycled and reused.
    • Lifetime warranty on shell that will not end up in a landfill.
    • No volatile organic compounds like other spas.
    • No Resin blown in manufacturing like other spas.
    • Fewer emissions in manufacturing than other spas
    • 120V and 240V options that offer far less amp draw and electrical usage than most spas.
    • One piece, heat-retaining shell that traps heat in and reduces electrical usage.
    • Hard-top cover that seals with a gasket and grove, preventing heat loss and improving energy efficiency.
    • Two speed pumps that filter and heat on low speed drawing minimal amps.


LS100 Laguna Plug-N-Play Spa InstallationLaguna Hot Tubs must be placed on a Patio, concrete slab, gravel base, hard-packed ground or deck that is flat and level, and the same size as the Spa or larger. Spas cannot be placed on uneven ground or on extremely soft ground as it will sink and both may damage the Spa. The key to all base applications is FLAT & LEVEL. As long as you are 2”- 3” within level, on any surface, you will be fine. If you are NOT using an existing Patio or previously constructed Deck or Base, please see the options below to find the one that will suit your situation best. (See the images below for reference)

Pea Gravel

Pea gravel is simple to level by using a straight 2 x 4 and carpenter ‘s level to check. Crushed rock is another choice. A disadvantage of gravel is the messy appearance, and weed control issues.


Pressure- treated decking can be used as a base. The decking should be fitted to a base frame made from 4” X 4” timber, which must be supported at regular intervals. The key here is filling in between the timbers (with sand or like material) so you have a FLAT surface for the spa to sit on.

Patio Stones/Pavers

Another foundation choice is pre-cast concrete patio slabs/pavers. Depending on the size of your spa and the stones, two rows of four (8) or three rows of three (9) are usually enough, if evenly spaced (depending on the size of the spa). Make sure they are well seated and level. Again, filling in between the pavers (with sand or like material) so you have a FLAT surface.

Concrete Slab

Although expensive, a poured concrete slab about 4″ in thickness is a common choice for a permanent installation and can be made a little wider than the spa to provide for a clean walkway and storage area.

Directly on Hard Packed Ground

Zen Hot Tubs are one of the few spas on the market where this is an option. Placing the spa directly onto a level dirt surface is sometimes acceptable. We do however suggest that you use, 4×8 sheets of 1” to 2” foam between the dirt and spa to offer a “cushion” for the spa to sit on. Taping two sheets of the foam together will be plenty surface area for any size Zen Hot Tub, and then simply cut away any excess after getting the spa in place.

(Please take into account your Electrical source when considering your base type & location)

Delivery & Access


The Spa will generally be delivered on a trailer. Please ensure there is adequate access to your driveway and Spa site. Hot Tubs will be positioned using a rolling dolly. The Spa will be positioned sideways onto the dolly. If you have ordered a Spa, but feel the dolly will not be adequate for maneuvering your Spa, then please let us know so that we can discuss your individual requirements. To avoid disappointment please check the points to consider below.


Check the dimensions of your Spa and compare the Spa dimensions to the width of any gates and paths along the delivery route between the road and the installation site (typically 36” gate openings are needed). It may be necessary for you to remove a gate or partially remove a fence in order to provide an unobstructed passageway. If the delivery route will require a 90-degree turn, don’t forget to check the measurements at the turn to ensure the Hot Tub will fit. Also, look for any protruding utility meters, low roof eaves, overhanging trees or gutters that might cause an obstruction. In some very rare circumstances, it might be necessary to hire a crane for the installation. This would be to avoid damage to the Tub or to your property because there is no other way to get the spa into position. This extra cost for the crane would have to be met by you.

Points to Consider

  1. Are doors, gates, and alleyways large enough? (36” in the typical minimum)
  2. Does the Spa have to be taken over soft lawn or deep gravel? If so, please make sure boards are put down for protection and to assist delivery if necessary. The dolly truck will not travel over a very soft/wet lawn or extremely uneven ground.
  3. Have you taken into account obstructions such as drainpipes, shelves, guttering, trees etc? Make sure these are removed prior to delivery if necessary. The overall height of the Spa will be higher by about 2’ due to using the dolly.
  4. Is there enough room for turning the Spa in tight corners to move it into position?
  5. Is there enough room to access the Spa, once it is in position? We recommend that there is access to all four sides however, it is particularly important that there is one access to a side containing the control pad. Please take into account your Electrical source when considering your Spa location.
  6. Are there any steep slopes or walls? We can manage small slopes or walls if extra labor is on site to help take the spa off the dolly. For larger walls and steep slopes, then a crane may be necessary.


Zen Hot Tubs Owner's Manual