PoolEye PE22

Description

PoolEye PE22

PoolEye Inground Pool alarms are the most technologically advanced pool alarms available. With PoolEye’s subsurface wave detection, you are alerted to accidental falls and unwanted intrusion while eliminating false alarms from wind, rain, falling leaves, etc. Objects 15 lbs. or more are detected when entering the pool and all models feature adjustable sensitivity. All PoolEye PE22 alarm systems can monitor pools up to 18’ X 36’. The PE22 features both poolside alarms and a poolside air/water temperature monitor and come equipped with an in-home remote alarm.

Pool Eye PE22 Features and Specifications

All in ground PoolEyes monitor pools up to 18′ x 36’*. The PE20 is PoolEye’s standard in ground pool alarm and the PE21, also for in ground pools, comes with both poolside and in-home remote alarms and a poolside air/water temperature monitor. In addition to subsurface wave detection technology, the PoolEye PE22 for in ground pools features an added layer of protection Infrared “Night Vision”, which monitors the pool area. The PE22 also comes equipped with an in-home remote alarm that alerts you with human voice announcements and/or siren, depending on the level of intrusion. LAYER 1 – Perimeter Detection Preventive alert system Passive infrared motion detector (PIR) range of 180 degrees and up to 50′ Independent On/Off control with child-proof lock In-home remote receiver features voice announcements when perimeter alarm is set off Automatic reset in 30 seconds Adjustable PIR sensitivity LAYER 2 – Immersion Detection Patented sub-surface wave detection Sensor placed below water surface eliminates false alarms due to wind, rain, falling leaves, etc. Detects objects 15 lbs or more Adjustable sensitivity 120 dB alarm siren, 95 dB at 10 ft. at poolside Remote Features Built-in RF channel A or B select Remote receives signal up to 100′ away Remote can be connected to a home security system Remote announces “check the pool” 3x then perimeter alarm signal detected Remote announces “emergency! check the pool!” and sounds alarm when underwater alarm signal received Remote announces “check the battery” when low battery signal received from poolside unit Remote uses AC power adapter (UL/CSA listed) Back-up 9 Volt battery (not incl.) for remote

Have Questions

If you have questions about the PoolEye PE22 please feel free to give us a call at 1-800-515-1747 or send us an email, [email protected].

At Pool Warehouse, We Know Swimming Inground Pool Kits!