Poolife Flocculant – 2.25lbs

$10.53

Pay over time with Bread
  • Enough for one dose on pools up to 15k Gallons
  • 2.25lbs bottle

Poolife Pool Care

This item ships in 3 to 5 business days.

31 in stock

$10.53
SKU: 62075 Category:

Description

Poolife Flocculant

Poolife Flocculant can be used as a filter aid or as a flocculant. To clear hazy water add to the filter and watch your water as it becomes clear. If the bottom is not visible use as a flocculant and vacuum to waste.

Poolife Flocculant 2.25lbs

Poolife Flocculant Notes:

  • If the pool is cloudy and the bottom is visible, follow the directions for FILTER AID.
  • If the pool is cloudy and the bottom is not visible, follow the directions for POOL FLOCCULANT (filter must be able to vacuum to waste).

Pool Warehouse

Americas #1 Source For All Your Backyard Needs, Online Since 1998!
Open: Monday-Friday 9am-6pm
Phone: 800-515-1747
Email: [email protected]

Pool Warehouse, Making Backyard Dreams Come True!

Additional information

Weight 2.5 lbs
Dimensions 9 × 3 × 3 in
Brand

Kit Type

Filter Cleaners

Directions

  1. Check the filter pressure. If it is more than 8 psi above the normal pressure for a clean filter, then backwash or rinse the filter off acording to manufacturer’s recommendations.
  2. Check returns to make sure they are directed toward the bottom and away form the skimmer in a circular pattern.
  3. Adjust pH to between 7.2 and 7.8 and total alkalinity to between 80 ppm and 120 ppm.
  4. Slowly add recommend amount of Poolife Flocculant listed on bottle directly to skimmer while pump is running.
  5. Filter continuously for 48 hours checking back pressure periodically. In the event of high filter pressure, backwash and rish filter according to filter manufacturer’s recommendations.
  6. If pool is still not clear, repeat steps 3, 4 and 5. If second treatment does not reslve the problem, contact your Poolife dealer.
  7. After pool is cleared, resume normal filtration routine (8-12 hours per day minimum).

Pool Flocculant Directions:

  1. Check filter pressure. If it more than 8 psi above the normal pressure for a clean filter, then backwash or rinse filter off according to manufactuer’s recommendations.
  2. Raise the water level in the pool to the top of the skimmer box
  3. Adjust pH to between 7.2 and 7.8 and total alkalinity to between 80 and 120 ppm.
  4. Shut off filter pump. Pump must be off for 24 to 48 hours. If pup is equipped witha timer, be certain that the “on trip” has been removed.
  5. In a large clean bucket of water make a solution of Poolife flocculant at the rate of 1.5 lb per 10,000 gallons of pool water and broadcast the solution evenly over the surface of the pool.
  6. Do not use the pool for 24-48 hours allowing th cloudiness (floc) to settle. Vacuum the floc to waste. If a large amount of floc becomes resuspended, turn the pump off, allow enough time for the floc to resettle, and then vacuum to waste.
  7. Check returns to make sure they are directed toward the bottom and away from the skimmer in a circular pattern. Filter until water clears. If pool does not clear after 48 hours contact your Poolife dealer.
  8. Check water balance and ajust accordingly.
  9. Resume normal filtration routine (8-12 hours per day minimum)

Reviews

There are no reviews yet.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.