Poolife NST Non-Stabilized Chlorine 20.6lbs

Description

Poolife NST Non-Stabilized Chlorine 20.6lbs

Poolife NST Non-Stabilized Chlorine 20.6lbs is a non stabilized chlorine tablet that does not contain cyanuric acid. These long lasting tablets are designed to work in your skimmer basket and will continuously sanitize your pool for up to one week. This tablet is compatible with chlorine, salt generators, ozone and mineral systems. 1 Tablet per 10,000 gallons of water per week or as need to maintain a chlorine residual of 1-4 ppm.

How to Use Poolife NST Non-Stabilized Chlorine 20.6lbs:

Do not allow this product in any chlorinating device which has previously contained other chemicals.

1. Use only in pools with a skimmer and skimmer basket.
2. Skimmer basket should be free of all other water treatment.
3. Place tablet in the empty skimmer basket.
4. Replace with a new tablet as needed. Do not mix with other products or dissolve before use.

Water Balance:

For optimum product performance, swimmer comfort and crystal clear water, always maintain pH from 7.2 to 7.6, total alkalinity from 60 to 120 ppm and calcium hardness above 200 ppm. Test frequently using a reliable test kit that measure all the above ranges. Use Poolife pool care products to make adjustments. Follow label directions for each product. Do not enter pool until free available chlorine residual is 1-4 ppm for each of the below water treatment applications.

Opening Your Pool:

For best results, see Water Balance section before treatment. Adjust and maintain ph in the 7.2 to 7.6 range. Follow “Shock Treatment” directions on this package. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.

Routine Chlorination:

For best results, see Water Balance section before treatment. Throughout the pool season, adjust pH to 7.2 to 7.6.

Begin using 1 tablet of this product per 10,000 gallons of pool water. After one day, use a suitable test kit to check free available chlorine residual. Increase or decrease the number of tablets to maintain a free available residual of 1-4 ppm.

Shock Treatment / SuperChlorination:

For best results, see Water Balance section before treatment. Adjust pH to 7.2 to 7.6 with Poolife water balance adjusters. Follow label directions. Shock treat using Poolife Quick Swim Oxidizer. Follow label directions on that product. Do not reenter pool until the free available chlorine residual is 1 to 4 ppm.